10NUF ULTRA-FINE 10-Inch Oval Ultra Fine Diamond Finishing Steel
$31.83
- 10 inch by 1/2 inch oval, 1800 grid diamond
- No messy oil or water
- Produces a razor edge
- Lightweight, versatile and easy to use
- Fits most standard knife blocks
Free Shipping On All Orders Over $50.00
The Ultimate Edge Model 10NUF Ultra-Fine finishing steel is designed as a finishing steel and not made to sharpen dull knives.
Using light pressure (the weight of the knife) this steel will produce a razor edge. 10 inch by 1/2 inch oval.
Specifications / Features
- 10″ x 1/2″ OVAL
- 1800 GRIT
- NO MESSY OIL OR WATER
- PRODUCES A RAZOR EDGE
- LIGHT WEIGHT
- VERSATILE
- EASY TO USE
Although steels often are touted as sharpening tools, few actually sharpen knife blades, but they do perform the vital task of realigning, or resetting, edges, which bend when contacting a cutting surface or other hard object. Because this tool’s rod contains microcrystalline diamonds bonded with nickel to an oval steel shaft, it’s hard enough to somewhat sharpen a blade. Using this steel won’t replace a professional sharpening job, which proceeds from coarse grinding to ever-finer grinding at tightly controlled angles. However, it will lengthen intervals between sharpening better than a steel without diamonds because it accomplishes the final task of a professional sharpening, which is polishing the edge with its 600-grit mesh to a fine point.
The rule is that a steel should be at least as long as the knife blade being drawn across it, and this steel’s 10-inch rod is long enough for most household knives. (Overall the tool is 15-1/4 inches long.) Lightweight and durable, the tool has a rugged plastic handle with a hanging hole, can be used for serrated knives as well as straight-edge blades, and also is useful for filing glass, crystal, and china.
Weight | 7.2 oz |
---|---|
Dimensions | 15.7 × 1.7 × 1.6 in |
Be the first to review “10NUF ULTRA-FINE 10-Inch Oval Ultra Fine Diamond Finishing Steel” Cancel reply
HOLD THE DIAMOND SHARPENING STEEL VERTICALLY OVER A NON-SLIP BASE. THE TIP OF THE BLADE SHOULD POINT UPWARD.
MOVE THE BLADE FROM BOLSTER TO POINT AT AN ANGLE OF ABOUT 20o WITH SLIGHT PRESSURE OVER THE STEEL.
HOLD THE DIAMOND SHARPENING STEEL VERTICALLY OVER A NON-SLIP BASE. THE TIP OF THE BLADE SHOULD POINT UPWARD.
MOVE THE BLADE FROM BOLSTER TO POINT AT AN ANGLE OF ABOUT 20o WITH SLIGHT PRESSURE OVER THE STEEL.
Related products
Diamond Sharpening Steels
Diamond Sharpening Steels
Diamond Sharpening Steels
Diamond Sharpening Steels
Diamond Sharpening Steels
4NFA SPORTSTER 4-Inch Ultra light folding diamond sharpening steel
Diamond Sharpening Steels
5N COMPANION 5-Inch Companion Narrow Diamond Sharpening Steel
Diamond Sharpening Steels
4NF SPORTSMAN 4-Inch Ultra light folding diamond sharpening steel.
Diamond Sharpening Steels
Reviews
There are no reviews yet.